Scroll down for specific TN Series CMS information.
DVR "TN" Series Software Upgrade
You can download the most recent software upgrade (as of 3/11/08) for our TN, TS and TT Series DVR's. This software includes the following feature enhancements: more . . . .
Latest firmware update for enhancing performance of the TN/TS/TT DVRs.
Download
the TN Series DVR upgrade software .zip file
here.
(Right
Click and Save Target As)
Software version 7AN0-2121-0316-2117
Read these
instructions for reference on how to install the TN Series software revision.
Please unzip the file directly to a USB flashdrive.
The flashdrive will now have 1 folder "upd_200s" containing
4 files on it.
As an alternative, users may elect to copy the "upd_200s" folder to a CD for upgrade instead of using a USB device.
Shut down
DVR and remove power for 10 seconds.
Restart DVR
After complete start up of the TN Series DVR, Enter Main Menu
Enter System Setup
Enter Version
Select Upgrade Via Local Device
Follow prompts for upgrade...
Verify a "Successful" message when complete.
Currently, we are not supporting Wireless LAN or SMS in the TN series.
Central Management Software (CMS)
Central
Management Software is a remote application
program for Speco Technologies' DVR-TL, TN, TS and TT Series of Internet
ready DVRs. It can be installed on a PC that is connected to a LAN or
Internet connection to remotely access, view and configure up to 16 DVRs
simultaneously (that's 256 camera views - can see 64 thumbnails per running
session)! Click here
for more CMS information.
Click here
to download (.zip file) CMS 2.0.0 software.
(7/28/08)
CMS
Manual Version 2.0.0
(.pdf file)
The latest CMS software upgrade supports our entire TN Series DVR line. This software includes feature enhancements as follows:
o On screen PTZ control
o System lock
To see a full list of new features click here.
Download New
CMS Manual (version 2.2.2).
(12/09/08)
Click here
to download (.zip file) CMS Ver. 2.2.2 software. (12/09/08)
(Right click and "save target as" to download
the file to your computer hard drive. After unzipping the file, run **.exe
and follow the instructions.)
Please note that if your CPU is insufficient for CMS
2.2.2, you must use CMS 2.0.0.
System Requirements:
Installation and other guides
DVR-4TN/8TN/16TN/160 Quick Install Set-up Guide
How
To Create DDNS For The TN Family DVR
DVR Installation Basics
POS Application Guide for your POS applications
Digital Deterrent™ Configuration
Talk with your sales representative for additional information.
DVR
TN Family Tutorial 101
See how to use this family of DVRs. Know one unit - know
them all
(Click
on title above - Please be patient - wait for demo to load)
You
will need to download the lastest version of Macromedia
Shockwave Player
to see this tutorial.
Please
read here
for FIRST TIME users of our tutorial.
DVR4TN/8TN/16TN/16TS/16TT Users Manual (.pdf)
DVRTN
Player Software (.zip)
Use TN Player to view playback of local files that have been downloaded
from a TN DVR.
Speco Remote/Speco Player Manual (.doc)
TN Family HDD Storage Calculator (.xls)**
TN Family Preset Configuration Table (.xls)**
USB
MobilRack drivers (.zip)
The EXT21FS driver
allows you to run a Linux System on Windows. Download the zip file, unzip
it and follow the instructions for installation (found in the .pdf file
listed below). If you are a Windows user, you need
to install this driver before using SpecoPlayer to see the .drv file.
USB
MobilRack drivers (.pdf)
EXT21FS driver installation instructions.
**When accessing the .xls files, if you see a menu pop-up
requesting a password, just click on cancel and the .xls file will then
show up.